Buy Cheap Grizzly G0537 22" Variable Speed Scroll Saw From Here Now!
Other features include: built in air nozzle to clear sawdust; easy to adjust blade tension knob; safety switch with key; clear plastic blade guard moves easily out of the way; no tools necessary for blade changes; approximate shipping weight is 52 lbs.
Readmore
Technical Details
- Cast iron base with rubber feet to dampen vibration tilts from 0° to 30°- Maximum cutting height: 2 1/8" @ 90°, 1" @ 30°
- Motor: 1/5 HP, 110V, single-phase, 1.4 amp, 60Hz, variable speed from 425 to 1322 SPM
- Takes 5" pin type blades
- Throat size: 21 7/8"
See more technical details
By J. Gibbons (Ft. Worth, TX)
I have bought this scroll saw in 1993. The large capacity has been very helpful. Overall, the saw did was I purchased it for, but I was sure glad to get the Delta saw with the graphite arms a couple years ago. The Grizzly saw vibrated excessively. I clamped it to a kitchen table, and it still was vibrating very much. Other annoying problems experienced is the blade clamping guards always loosening and the connection between the motor and the arms came loose. This machine would be good for a starter if you lacked the money to purchase one with less vibration; consequently it is now in the attic waiting for my daughter when she moves out.
By scrollerbear (Colorado)
I cut sheet metal (24 guage cold rolled steel, copper and aluminum) with scroll saws. I would like a larger saw as a second or third saw.
The "c" arm type of saw is usually far more aggresive when cutting metal. Since I do not cut thick packs of material, the differance of the cut from top to bottom on this kind of saw would not matter too much.
Of course, the saw would have to have a quick change type of blade system for me. I use a lot of blades. It should have at least 1700 rpm and preferably a belt drive speed control.
Sounds some what like the Delta Q-3? Yes it does. However, I have found that the quick clamp blade parts Delta now sells do not hold up well. Wear of the "link" on the top blade assembly is excessive in a short period of time. The "link" is made of soft metal and should be hardened metal. I have found three out of four new top and bottom quick clamp blade assemblys that I purchased would not even work as designed.
Some one out there needs to manufacture a good, larger size, quality industrial scroll saw at a resonable cost. That unfortunately is not likely to happen.
I have hoped that Grizzly Tool would do so.
Scrollerbear
By nada (unknown)
This is one of the worst tools I have in my shop,First off it will only take Pinned type blades which limits the cuts you can do,Second while it is crafted entirely from cast iron(which is normally a good thing for good shop tools)in this case it seems they used a very soft iron,which flexes too easily,the cutting arm at full speed is not only moving up and down but is moving from side to side on my unit there is about a 3/4 inch side to side movement(this is with no pressure on the blade) so when cutting you have to take into account the side to side travel.
another thing to consider is since the arm is moving up-down,and also side-side there is ALOT of vibration,My suggestion is buy a scroll saw with a stiffer arm assembly.another point of interest is the table while it is large and made entirely of cast iron they chose to mount it by using 2 screws,1 on front of table 1 on the back which allows you to set the table miter,pivoting on the 2 screws and locking it in place with a knob on the front,and while this setup may work with smaller lighter tables it just doesnt seem to work well with the large heavy table on this model,in retrospect I would not have purchased this saw if I knew how it operated.
Images Product
Buy Grizzly G0537 22" Variable Speed Scroll Saw Now
Buy Grizzly G0537 22" Variable Speed Scroll Saw |
Cheap Grizzly G0537 22" Variable Speed Scroll Saw | Low Price Grizzly G0537 22" Variable Speed Scroll Saw | Best Grizzly G0537 22" Variable Speed Scroll Saw | Order Grizzly G0537 22" Variable Speed Scroll Saw | Good Grizzly G0537 22" Variable Speed Scroll Saw | Lowest Grizzly G0537 22" Variable Speed Scroll Saw | Save Grizzly G0537 22" Variable Speed Scroll Saw | Discount Grizzly G0537 22" Variable Speed Scroll Saw | Purchase Grizzly G0537 22" Variable Speed Scroll Saw | Shop Grizzly G0537 22" Variable Speed Scroll Saw | Buying Grizzly G0537 22" Variable Speed Scroll Saw | Where Grizzly G0537 22" Variable Speed Scroll Saw
0 comments:
Post a Comment