0 SE 1.25" High Speed Saw Blade with Mandrel

Review SE 1.25" High Speed Saw Blade with Mandrel

Buy Cheap SE 1.25" High Speed Saw Blade with Mandrel From Here Now!
Endurance blade offers faster cutting and extra long life for hobbyist. A hardened alloy steel body is used to ensure straight, accurate cuts. The features add up to a good quality blade that hobbyist can depend on, time and time again.
Readmore

Technical Details

- 1.25" Diameter
- Arbor/mandrel = 1/8" shank with 1/4" screw
- Coarse Tooth
- Qualtiy High Speed Steel
See more technical details

 "Chinese junk" 2010-05-11
By Sergey Leonidov (New York)
I never bash Chinese-made goods but this one is junk, and not of the good seafaring kind. This cannot be a high-speed blade as advertized because the rod with which it attaches to the Dremel tool does not center the cutting disk. Simply, the disk hole is bigger than than the shaft and it is impossible to keep the disk on center. Therefore, at high speed it causes severe vibration. Since I could not use it at high speed, I could not test its cutting abilities. Wasted money for me.

 "Works great" 2010-03-15
By BobLap (Jackson, NJ United States)
Used it to cut some PVC in a hard to reach location. Worked fine as long as I was patient.

 "BE CAREFUL, NO GUARD!" 2009-12-21
By D. Rodriguez (Hixson, TN United States)
THIS TOOL WORKS FOR CUTTING SMALL STUFF. I PURCHASED IT TO TRY TO CUT SOME THICK CAULK AROUND MY WINDOWS TO REMOVE THE WINDOW. THE CAULK WAS SO THICK THAT MY DREMMEL WAS HAVING A HARD TIME CUTTING, FOR IT WOULD STOP SPINNING. I GIVE IT A 3 STAR BECAUSE YOU HAVE TO BE VERY CAREFUL; THERE IS NO GUARD!

 "Good and simple" 2009-08-28
By Walter Oliveira Jr. (Brazil)
I think this saw will help me cutting my small pieces of wood...



so far, it has done a great job.

 "so far so good" 2009-01-14
By Brent A. Thomann (Amherst, NY)
so far so good.



cuts hard to reach wood with my dremel drill.


Images Product

Buy SE 1.25" High Speed Saw Blade with Mandrel Now
Buy SE 1.25" High Speed Saw Blade with Mandrel |
Cheap SE 1.25" High Speed Saw Blade with Mandrel | Low Price SE 1.25" High Speed Saw Blade with Mandrel | Best SE 1.25" High Speed Saw Blade with Mandrel | Order SE 1.25" High Speed Saw Blade with Mandrel | Good SE 1.25" High Speed Saw Blade with Mandrel | Lowest SE 1.25" High Speed Saw Blade with Mandrel | Save SE 1.25" High Speed Saw Blade with Mandrel | Discount SE 1.25" High Speed Saw Blade with Mandrel | Purchase SE 1.25" High Speed Saw Blade with Mandrel | Shop SE 1.25" High Speed Saw Blade with Mandrel | Buying SE 1.25" High Speed Saw Blade with Mandrel | Where SE 1.25" High Speed Saw Blade with Mandrel

0 16" Professional Variable Speed Scroll Saw

Review 16" Professional Variable Speed Scroll Saw

Buy Cheap 16" Professional Variable Speed Scroll Saw From Here Now!
An outstanding value in a professional-quality saw that lets anyone make intricate pattern cuts for job or hobby work. Safety on/off switch with clear blade-shield. Comes ready-to-cut out of the box. Blade size 5-1/4" x 7/64"; pin-end blade style.
Readmore

Technical Details

See more technical details

 "No Information" 2010-05-27
By Thomas J., Murphy (NORTH EAST, MD, US)
I'm looking to buy another Scroll Saw right now, this product gives me no information. Does it require a plain end blade or does it reqire a pin type blade? Is it built with cast iron so it will be heavy and not jump all over the place? What is the size of the motor? Does it come with a warranty? All these questions should be spelled out in the description, but they're not!

 "Great value!" 2008-06-17
By Lynn (God's Land)
I bought this for hubby and my plan worked. No more slacking around the house, he's in the garage building things. Probably not the best for heavy-duty projects, but perfect for home touch up, i.e. replace moulding, deck steps, items that are curvy with little detail. Light weight and portable, can be used indoors or outdoors. And priced reasonably.


Images Product

Buy 16" Professional Variable Speed Scroll Saw Now
Buy 16" Professional Variable Speed Scroll Saw |
Cheap 16" Professional Variable Speed Scroll Saw | Low Price 16" Professional Variable Speed Scroll Saw | Best 16" Professional Variable Speed Scroll Saw | Order 16" Professional Variable Speed Scroll Saw | Good 16" Professional Variable Speed Scroll Saw | Lowest 16" Professional Variable Speed Scroll Saw | Save 16" Professional Variable Speed Scroll Saw | Discount 16" Professional Variable Speed Scroll Saw | Purchase 16" Professional Variable Speed Scroll Saw | Shop 16" Professional Variable Speed Scroll Saw | Buying 16" Professional Variable Speed Scroll Saw | Where 16" Professional Variable Speed Scroll Saw

0 Grizzly G0537 22" Variable Speed Scroll Saw

Review Grizzly G0537 22" Variable Speed Scroll Saw

Buy Cheap Grizzly G0537 22" Variable Speed Scroll Saw From Here Now!
Other features include: built in air nozzle to clear sawdust; easy to adjust blade tension knob; safety switch with key; clear plastic blade guard moves easily out of the way; no tools necessary for blade changes; approximate shipping weight is 52 lbs.
Readmore

Technical Details

- Cast iron base with rubber feet to dampen vibration tilts from 0° to 30°
- Maximum cutting height: 2 1/8" @ 90°, 1" @ 30°
- Motor: 1/5 HP, 110V, single-phase, 1.4 amp, 60Hz, variable speed from 425 to 1322 SPM
- Takes 5" pin type blades
- Throat size: 21 7/8"
See more technical details

 "Beginner saw only" 2007-03-14
By J. Gibbons (Ft. Worth, TX)
I have bought this scroll saw in 1993. The large capacity has been very helpful. Overall, the saw did was I purchased it for, but I was sure glad to get the Delta saw with the graphite arms a couple years ago. The Grizzly saw vibrated excessively. I clamped it to a kitchen table, and it still was vibrating very much. Other annoying problems experienced is the blade clamping guards always loosening and the connection between the motor and the arms came loose. This machine would be good for a starter if you lacked the money to purchase one with less vibration; consequently it is now in the attic waiting for my daughter when she moves out.

 "feathures" 2006-01-28
By scrollerbear (Colorado)
I cut sheet metal (24 guage cold rolled steel, copper and aluminum) with scroll saws. I would like a larger saw as a second or third saw.



The "c" arm type of saw is usually far more aggresive when cutting metal. Since I do not cut thick packs of material, the differance of the cut from top to bottom on this kind of saw would not matter too much.



Of course, the saw would have to have a quick change type of blade system for me. I use a lot of blades. It should have at least 1700 rpm and preferably a belt drive speed control.



Sounds some what like the Delta Q-3? Yes it does. However, I have found that the quick clamp blade parts Delta now sells do not hold up well. Wear of the "link" on the top blade assembly is excessive in a short period of time. The "link" is made of soft metal and should be hardened metal. I have found three out of four new top and bottom quick clamp blade assemblys that I purchased would not even work as designed.



Some one out there needs to manufacture a good, larger size, quality industrial scroll saw at a resonable cost. That unfortunately is not likely to happen.



I have hoped that Grizzly Tool would do so.



Scrollerbear

 "Very sloppy cuts,tons of Vibration" 2005-07-09
By nada (unknown)
This is one of the worst tools I have in my shop,First off it will only take Pinned type blades which limits the cuts you can do,Second while it is crafted entirely from cast iron(which is normally a good thing for good shop tools)in this case it seems they used a very soft iron,which flexes too easily,the cutting arm at full speed is not only moving up and down but is moving from side to side on my unit there is about a 3/4 inch side to side movement(this is with no pressure on the blade) so when cutting you have to take into account the side to side travel.

another thing to consider is since the arm is moving up-down,and also side-side there is ALOT of vibration,My suggestion is buy a scroll saw with a stiffer arm assembly.another point of interest is the table while it is large and made entirely of cast iron they chose to mount it by using 2 screws,1 on front of table 1 on the back which allows you to set the table miter,pivoting on the 2 screws and locking it in place with a knob on the front,and while this setup may work with smaller lighter tables it just doesnt seem to work well with the large heavy table on this model,in retrospect I would not have purchased this saw if I knew how it operated.


Images Product

Buy Grizzly G0537 22" Variable Speed Scroll Saw Now
Buy Grizzly G0537 22" Variable Speed Scroll Saw |
Cheap Grizzly G0537 22" Variable Speed Scroll Saw | Low Price Grizzly G0537 22" Variable Speed Scroll Saw | Best Grizzly G0537 22" Variable Speed Scroll Saw | Order Grizzly G0537 22" Variable Speed Scroll Saw | Good Grizzly G0537 22" Variable Speed Scroll Saw | Lowest Grizzly G0537 22" Variable Speed Scroll Saw | Save Grizzly G0537 22" Variable Speed Scroll Saw | Discount Grizzly G0537 22" Variable Speed Scroll Saw | Purchase Grizzly G0537 22" Variable Speed Scroll Saw | Shop Grizzly G0537 22" Variable Speed Scroll Saw | Buying Grizzly G0537 22" Variable Speed Scroll Saw | Where Grizzly G0537 22" Variable Speed Scroll Saw

0 16" Variable Speed Scroll Saw

Review 16" Variable Speed Scroll Saw

Buy Cheap 16" Variable Speed Scroll Saw From Here Now!
An outstanding value in a professional-quality saw that lets anyone make intricate pattern cuts for job or hobby work. Safety on/off switch with clear blade-shield. Comes ready-to-cut out of the box. Blade size 5-1/4" x 7/64"; pin-end blade style.
Readmore

Technical Details

See more technical details

 "Great value!" 2008-06-17
By Lynn (God's Land)
I bought this for hubby and my plan worked. No more slacking around the house, he's in the garage building things. Probably not the best for heavy-duty projects, but perfect for home touch up, i.e. replace moulding, deck steps, items that are curvy with little detail. Light weight and portable, can be used indoors or outdoors. And priced reasonably.


Images Product

Buy 16" Variable Speed Scroll Saw Now
Buy 16" Variable Speed Scroll Saw |
Cheap 16" Variable Speed Scroll Saw | Low Price 16" Variable Speed Scroll Saw | Best 16" Variable Speed Scroll Saw | Order 16" Variable Speed Scroll Saw | Good 16" Variable Speed Scroll Saw | Lowest 16" Variable Speed Scroll Saw | Save 16" Variable Speed Scroll Saw | Discount 16" Variable Speed Scroll Saw | Purchase 16" Variable Speed Scroll Saw | Shop 16" Variable Speed Scroll Saw | Buying 16" Variable Speed Scroll Saw | Where 16" Variable Speed Scroll Saw

0 16" Variable Speed Scroll Saw

Review 16" Variable Speed Scroll Saw

Buy Cheap 16" Variable Speed Scroll Saw From Here Now!
An outstanding value in a professional-quality saw that lets anyone make intricate pattern cuts for job or hobby work. Safety on/off switch with clear blade-shield. Comes ready-to-cut out of the box. Blade size 5-1/4" x 7/64"; pin-end blade style.
Readmore

Technical Details

See more technical details

 "Great value!" 2008-06-17
By Lynn (God's Land)
I bought this for hubby and my plan worked. No more slacking around the house, he's in the garage building things. Probably not the best for heavy-duty projects, but perfect for home touch up, i.e. replace moulding, deck steps, items that are curvy with little detail. Light weight and portable, can be used indoors or outdoors. And priced reasonably.


Images Product

Buy 16" Variable Speed Scroll Saw Now
Buy 16" Variable Speed Scroll Saw |
Cheap 16" Variable Speed Scroll Saw | Low Price 16" Variable Speed Scroll Saw | Best 16" Variable Speed Scroll Saw | Order 16" Variable Speed Scroll Saw | Good 16" Variable Speed Scroll Saw | Lowest 16" Variable Speed Scroll Saw | Save 16" Variable Speed Scroll Saw | Discount 16" Variable Speed Scroll Saw | Purchase 16" Variable Speed Scroll Saw | Shop 16" Variable Speed Scroll Saw | Buying 16" Variable Speed Scroll Saw | Where 16" Variable Speed Scroll Saw